Saves device data in CSV format.
On Android, it is saved to the Download folder.

Loads device data saved in CSV format.
On Android, files are loaded from the Documents folder.

Writes the read device number to Glow R.

Add, remove, or swap devices.
If the configured number exceeds the maximum device limit, the setting will be ignored.
Please specify a value between 1 and the maximum number of devices.

Delete Device Number :

Append before

Swap and

Lock the device so that it can only be controlled from a designated central device.

Lights up all LEDs with the configured color.

Save the configuration data for runners and groups in JSON format.
On Android, it is saved to the Download folder.

Loads runner and group configuration data saved in JSON format.
On Android, files are loaded from the Documents folder.

Set the color, lighting pattern, and lighting interval for each runner.
Settings are not finalized until you press the Write Settings button.
Enter the number of devices and the lap time, then press "Calculate" to compute the lighting interval.

Please configure the runner settings before running.
The flashing interval, LED color, and pattern can be changed even while runners are in the middle of the race.
You can configure 8 groups (Gp).
Settings that are not checked as "ON" are ignored.

You can adjust the runner's pace using the slide bar while they are running.
You can pause each runner individually using the switch on the right.
Set the switch to OFF (gray) to pause, and to ON to resume.

The lighting interval is automatically adjusted based on section times.
Not available for multiple runners.
Please enter the runner, the number of devices installed, and the split lap times.
It will consist of five sections.
For a 100m distance, please enter a split time for every 20-meter interval.

Saves the split time data in JSON format.
On Android, it is saved to the Download folder.

Loads split time data saved in JSON format.
On Android, it is saved to the Download folder.